Example 8 is an inline bypass solution on GigaVUE-HC2 for an inline network group. This is a many-to-one example with two inline networks and one inline tool. The inline networks are mix of protected and unprotected.
On GigaVUE-HC3, unprotected inline bypass can be configured on any module on the node. Protected inline bypass can be configured on the bypass combo module on ports c1..c4.
On GigaVUE-HC1, unprotected inline bypass can be configured on the base module, with the inline networks and inline tools on ports 1/1/x1..x12 and 1/1/g1..g4, or on the bypass combo module on ports x1..x4. Protected inline bypass can be configured on the bypass combo module, or on the TAP-HC1-G10040 module placed in either bay 2 or bay 3, so the ports will be 1/2/g1..g8 or 1/3/g1..g8. On the TAP module, you will need to configure inline network ports and the inline network because they are not created automatically (as they are on bypass combo modules).
Step
Description
Command
- Configure inline network aliases, port type (inline-network), and administratively enable inline network ports.
(config) # port 7/2/x1 alias iN1
(config) # port iN1 type inline-network
(config) # port iN1 params admin enable
(config) # port 7/2/x20 alias iN2
(config) # port iN2 type inline-network
(config) # port iN2 params admin enable
- Configure inline network.
(config) # inline-network alias inNet pair net-a iN1 and net-b iN2
- Configure an inline network group consisting of a single unprotected inline network and two protected inline networks.
(config) # inline-network-group alias inNetGroup
(config inline-network-group alias inNetGroup) # network-list inNet,default_inline_net_7_2_1,default_inline_net_7_2_3
(config inline-network-group alias inNetGroup) # exit
(config) #
- Configure inline tool ports, port type (inline-tool), and administratively enable inline tool ports.
(config) # port 7/2/x3 alias iT1
(config) # port iT1 type inline-tool
(config) # port iT1 params admin enable
(config) # port 7/2/x4 alias iT2
(config) # port iT2 type inline-tool
(config) # port iT2 params admin enable
- Configure inline tool and enable it. Also, specify that the inline tool is going to be shared by different sources. When shared is enabled (true), the inline tool can receive traffic from multiple sources (the inline networks in the inline network group).
(config) # inline-tool alias inTool pair tool-a iT1 and tool-b iT2
(config) # inline-tool alias inTool enable
(config) # inline-tool alias inTool shared true
- Configure map passall, from inline network group to inline tool.
(config) # map-passall alias inMap
(config map-passall alias inMap) # from inNetGroup
(config map-passall alias inMap) # to inTool
(config map-passall alias inMap) # exit
(config) #
- Configure the path of the traffic to inline tool.
(config) # inline-network alias inNet traffic-path to-inline-tool
(config) # inline-network alias default_inline_net_7_2_1 traffic-path to-inline-tool
(config) # inline-network alias default_inline_net_7_2_3 traffic-path to-inline-tool
- Disable physical bypass on the default inline network aliases.
(config) # inline-network alias default_inline_net_7_2_1 physical-bypass disable
(config) # inline-network alias default_inline_net_7_2_3 physical-bypass disable
- Display the configuration for this example.
(config) # show inline-network-group
(config) # show inline-tool
(config) # show map
'업무이야기 > 패킷전달플랫폼' 카테고리의 다른 글
| Gigamon Inline Flow Mapping Based Solution A (0) | 2021.01.17 |
|---|---|
| Gigamon Inline Network Group (Many-to-Many) (0) | 2021.01.17 |
| Gigamon Inline Tool Series with Local Failover Action (0) | 2021.01.17 |
| Gigamon Inline Tool Series (0) | 2021.01.17 |
| Gigamon Inline Tool Group (N+1) Redundancy (0) | 2021.01.17 |