Gigamon Inline Tool Series

“파트너스 활동을 통해 일정액의 수수료를 제공받을 수 있음"

Example 6 is an inline bypass solution on GigaVUE-HC2 for an inline tool series. The inline network is unprotected. The order of the tools and inline tool groups in the tool list defines the order of the series. The map directs the traffic to the series, that is, to the first inline tool or inline tool group in the tool list. Example 6 includes two inline tools in the series and an inline tool group.

Step

Description

Command

1. Configure inline network aliases, port type (inline-network), and administratively enable inline network ports.

(config) # port 3/1/x1 alias iN11
(config) # port iN11 type inline-network
(config) # port iN11 params admin enable

(config) # port 3/1/x2 alias iN12
(config) # port iN12 type inline-network
(config) # port iN12 params admin enable

2. Configure inline network.

(config) # inline-network alias inNet pair net-a iN11 and net-b iN12

3. Configure inline tool ports, port type (inline-tool), and administratively enable inline tool ports.

(config) # port 3/1/x3 alias iT1
(config) # port iT1 type inline-tool
(config) # port iT1 params admin enable

(config) # port 3/1/x4 alias iT2
(config) # port iT2 type inline-tool
(config) # port iT2 params admin enable

(config) # port 3/1/x5 alias iT3
(config) # port iT3 type inline-tool
(config) # port iT3 params admin enable

(config) # port 3/1/x6 alias iT4
(config) # port iT4 type inline-tool
(config) # port iT4 params admin enable

(config) # port 3/1/x7 alias iT5
(config) # port iT5 type inline-tool
(config) # port iT5 params admin enable

(config) # port 3/1/x8 alias iT6
(config) # port iT6 type inline-tool
(config) # port iT6 params admin enable

(config) # port 3/1/x9 alias iT7
(config) # port iT7 type inline-tool
(config) # port iT7 params admin enable

(config) # port 3/1/x10 alias iT8
(config) # port iT8 type inline-tool
(config) # port iT8 params admin enable

4. Configure inline tools and enable them.

(config) # inline-tool alias inTool1 pair tool-a iT1 and tool-b iT2
(config) # inline-tool alias inTool2 pair tool-a iT3 and tool-b iT4
(config) # inline-tool alias inTool3 pair tool-a iT5 and tool-b iT6
(config) # inline-tool alias inTool4 pair tool-a iT7 and tool-b iT8

(config) # inline-tool alias inTool1 enable
(config) # inline-tool alias inTool2 enable
(config) # inline-tool alias inTool3 enable
(config) # inline-tool alias inTool4 enable

5. Configure inline tool group and parameters. Enable it and then configure failover action.

(config) # inline-tool-group alias inToolGroup
(config inline-tool-group alias inToolGroup) # tool-list inTool2,inTool3
(config inline-tool-group alias inToolGroup) # enable
(config inline-tool-group alias inToolGroup) # failover-action tool-bypass
(config inline-tool-group alias inToolGroup) # exit
(config) #

6. Configure inline tool series and enable it. Then configure failover action.

(config) # inline-serial alias inSer
(config inline-serial alias inSer) # inline-tool-list inTool1,inToolGroup,inTool4
(config inline-serial alias inSer) # enable
(config inline-serial alias inSer) # failover-action tool-bypass
(config inline-serial alias inSer) # exit
(config) #

7. Configure map passall, from inline network to inline tool series.

(config) # map-passall alias inMap
(config map-passall alias inMap) # from inNet
(config map-passall alias inMap) # to inSer
(config map-passall alias inMap) # exit
(config) #

8. Configure the path of the traffic to inline tool.

(config) # inline-network alias inNet traffic-path to-inline-tool

9. Display the configuration for this example.

(config) # show inline-serial
(config) # show map

“파트너스 활동을 통해 일정액의 수수료를 제공받을 수 있음"