쫑콩아빠의 지금 이 순간...

gigamon-0200fd (config policy alias test3) # condition  add ?
< condition >    Add a condition to the policy
GsCpuUtilHigh    
GsCpuUtilLow     
GsHbStatusDown   
GsHbStatusUp     
GsPktBufThHigh   
GsPktBufThLow    
GsPktDropRateHigh 
GsPktDropRateLow 
GsRxPktErrorHigh 
GsRxPktErrorLow  
GsRxPktRateHigh  
GsRxPktRateLow   
InlineToolDown   
InlineToolReady  
InlineToolUp     
PortDown         
PortRxBufferHigh 
PortRxBufferLow  
PortRxDiscardsHigh 
PortRxDiscardsLow 
PortRxDropsHigh  
PortRxDropsLow   
PortRxErrorsHigh 
PortRxErrorsLow  
PortRxUtilHigh   
PortRxUtilLow    
PortTxBufferHigh 
PortTxBufferLow  
PortTxDiscardsHigh 
PortTxDiscardsLow 
PortTxDropsHigh  
PortTxDropsLow   
PortTxErrorsHigh 
PortTxErrorsLow  
PortTxUtilHigh   
PortTxUtilLow    
PortUp           
TimeFriday       
TimeMonday       
TimeOfDay        
TimeSaturday     
TimeSunday       
TimeThursday     
TimeTuesday      
TimeWednesday    
TimeWeekday      
TimeWeekend      


gigamon-0200fd (config policy alias test3) # action add ?
< action >       Add an action to the policy.
FlexInlineOOBAdd 
FlexInlineOOBDelete 
InlineNetTrafficPath 
InlineToolDisable 
InlineToolEnable 
InlineToolRecover 
MapDisable       
MapEnable        
MapGsRuleAdd     
MapGsRuleDelete  
MapRuleAdd       
MapRuleDelete    
PhysicalByPassDisable 
PhysicalByPassEnable 
PolicyDisable    
PolicyEnable     
PortDisable      
PortEnable       
PortFilterAdd    
PortFilterDelete 
PortFilterDeleteAll 
WriteMemory      

Gigamon Policy (Active Visibility)

gigamon-0200fd (config policy alias test3) # condition add ?
< condition > Add a condition to the policy
GsCpuUtilHigh
GsCpuUtilLow
GsHbStatusDown
GsHbStatusUp
GsPktBufThHigh
GsPktBufThLow
GsPktDropRateHigh
GsPktDropRateLow
GsRxPktErrorHigh
GsRxPktErrorLow
GsRxPktRateHigh
GsRxPktRateLow
InlineToolDown
InlineToolReady
InlineToolUp
PortDown
PortRxBufferHigh
PortRxBufferLow
PortRxDiscardsHigh
PortRxDiscardsLow
PortRxDropsHigh
PortRxDropsLow
PortRxErrorsHigh
PortRxErrorsLow
PortRxUtilHigh
PortRxUtilLow
PortTxBufferHigh
PortTxBufferLow
PortTxDiscardsHigh
PortTxDiscardsLow
PortTxDropsHigh
PortTxDropsLow
PortTxErrorsHigh
PortTxErrorsLow
PortTxUtilHigh
PortTxUtilLow
PortUp
TimeFriday
TimeMonday
TimeOfDay
TimeSaturday
TimeSunday
TimeThursday
TimeTuesday
TimeWednesday
TimeWeekday
TimeWeekend

gigamon-0200fd (config policy alias test3) # action add ?
< action > Add an action to the policy.
FlexInlineOOBAdd
FlexInlineOOBDelete
InlineNetTrafficPath
InlineToolDisable
InlineToolEnable
InlineToolRecover
MapDisable
MapEnable
MapGsRuleAdd
MapGsRuleDelete
MapRuleAdd
MapRuleDelete
PhysicalByPassDisable
PhysicalByPassEnable
PolicyDisable
PolicyEnable
PortDisable
PortEnable
PortFilterAdd
PortFilterDelete
PortFilterDeleteAll
WriteMemory

Example 7 is an inline bypass solution on GigaVUE-HC2 for an inline tool series. The failover action is specified for one of the inline tools (network-bypass), rather than for the series as a whole. Also the recovery mode is specified as manual.

When the individual inline tool fails, traffic is dropped at the inline network ports. When the tool recovers and is ready to be put back into service, use the recover command.

Step

Description

Command

1. Configure inline network aliases, port type (inline-network), and administratively enable inline network ports.

(config) # port 3/1/x1 alias iN11
(config) # port iN11 type inline-network
(config) # port iN11 params admin enable

(config) # port 3/1/x2 alias iN12
(config) # port iN12 type inline-network
(config) # port iN12 params admin enable

2. Configure inline network.

(config) # inline-network alias inNet pair net-a iN11 and net-b iN12

3. Configure inline tool ports, port type (inline-tool), and administratively enable inline tool ports.

(config) # port 3/1/x3 alias iT1
(config) # port iT1 type inline-tool
(config) # port iT1 params admin enable

(config) # port 3/1/x4 alias iT2
(config) # port iT2 type inline-tool
(config) # port iT2 params admin enable

(config) # port 3/1/x5 alias iT3
(config) # port iT3 type inline-tool
(config) # port iT3 params admin enable

(config) # port 3/1/x6 alias iT4
(config) # port iT4 type inline-tool
(config) # port iT4 params admin enable

(config) # port 3/1/x7 alias iT5
(config) # port iT5 type inline-tool
(config) # port iT5 params admin enable

(config) # port 3/1/x8 alias iT6
(config) # port iT6 type inline-tool
(config) # port iT6 params admin enable

4. Configure inline tools and enable them.

(config) # inline-tool alias inTool1 pair tool-a iT1 and tool-b iT2
(config) # inline-tool alias inTool2 pair tool-a iT3 and tool-b iT4
(config) # inline-tool alias inTool3 pair tool-a iT5 and tool-b iT6

(config) # inline-tool alias inTool1 enable
(config) # inline-tool alias inTool2 enable
(config) # inline-tool alias inTool3 enable

5. Configure failover action and recovery mode for the second tool in the list.

(config) # inline-tool alias inTool2 failover-action network-bypass
(config) # inline-tool alias inTool2 recovery mode manual

6. Configure inline tool series, and enable it, then configure failover action, per-tool.

(config) # inline-serial alias inSer
(config inline-serial alias inSer) # inline-tool-list inTool1,inTool2,inTool3
(config inline-serial alias inSer) # enable
(config inline-serial alias inSer) # failover-action per-tool
(config inline-serial alias inSer) # exit
(config) #

7. Configure map passall, from inline network to inline tool series.

(config) # map-passall alias inMap
(config map-passall alias inMap) # from inNet
(config map-passall alias inMap) # to inSer
(config map-passall alias inMap) # exit
(config) #

8. Configure the path of the traffic to inline tool.

(config) # inline-network alias inNet traffic-path to-inline-tool

9. Display the configuration for this example.

(config) # show inline-tool
(config) # show inline-serial

10. Display the forwarding state when the tool fails.

(config) # show inline-network

11. After the inline tool recovers and is in the ready state, put the inline tool back into service.

(config) # inline-tool alias inTool2 recover