>> Server Load Balancing Information# /c/dump
script start "Alteon 180e" 4  /**** DO NOT EDIT THIS LINE!
/* Configuration dump taken  1:49:48 Sat Feb  4, 2012
/* Version 10.0.28,  Base MAC address 00:60:cf:42:d4:10
/c/sys
        tnet ena
/c/stp 1/off
/c/ip/if 1
        ena
        addr 10.10.10.100
        mask 255.255.255.0
        broad 10.10.10.255
/c/ip/gw 1
        ena
        addr 10.10.10.1
/c/slb
        on
/c/slb/adv
        direct ena
/c/slb/real 1
        ena
        rip 10.10.10.12
/c/slb/real 2
        ena
        rip 10.10.10.13
/c/slb/group 1
        metric hash
        add 1
        add 2
/c/slb/port 1
        client ena
        server ena
        proxy ena
        pip 10.10.10.21
/c/slb/port 2
        client ena
        server ena
        proxy ena
        pip 10.10.10.22
/c/slb/port 3
        client ena
        server ena
        proxy ena
        pip 10.10.10.23
/c/slb/port 4
        client ena
        server ena
        proxy ena
        pip 10.10.10.24
/c/slb/port 5
        client ena
        server ena
        proxy ena
        pip 10.10.10.25
/c/slb/port 6
        proxy ena
        pip 10.10.10.26
/c/slb/port 7
        client ena
        proxy ena
        pip 10.10.10.27
/c/slb/port 8
        proxy ena
        pip 10.10.10.28
/c/slb/virt 1
        ena
        vip 10.10.10.11
/c/slb/virt 1/service http
        group 1
/c/slb/virt 1/service ftp
        group 1
        ftpp ena
/c/slb/virt 1/service ftp-data
        group 1
/
script end  /**** DO NOT EDIT THIS LINE!

저작자 표시 비영리 변경 금지
신고

'업무이야기 > Radware' 카테고리의 다른 글

Alteon L4 FWLB Sample  (0) 2012.04.20
Alteon config 기본 설정  (0) 2012.02.07
Alteon SLB에서 PIP(Proxy IP) 설정  (1) 2012.02.04
Alteon L4 스위치 기본 설정방법  (0) 2011.12.26
L4 스위치 VRRP 로 SLB 구성 (Hotstandby)  (0) 2011.12.21
L4 스위치 VRRP  (0) 2011.12.21

 

ServerIron SLB(Server Load Balancing)


 


ServerIron>enable


Password:****


ServerIron#config term


ServerIron(config)#ip add 209.157.22.10/24 : switch IP Address 설정하는 명령


ServerIron(config)#ip default-gateway 209.157.22.10 : switch default-gateway 설정하는 명령


ServerIron(config)#server router-port 1 : router 연결되어 있는 port 지정하는 명령


ServerIron(config)#server real server1 209.157.22.1  : real server 설정하는 명령


ServerIron(config-rs-server1)#port http                        : load balancing port 지정하는 명령


ServerIron(config-rs-server1)#port default disable        


ServerIron(config-rs-server1)#port http keepalive  : http port  health check enable시키는 명령


ServerIron(config-rs-server1)#port http url GET /index.htm : http health check url 설정하는 명령


ServerIron(config-rs-server1)#server real server2 209.157.22.2


ServerIron(config-rs-server2)#port http


ServerIron(config-rs-server2)#port default disable


ServerIron(config-rs-server2)# port http url GET /index.htm


ServerIron(config-vs-server2)#server virtual virtual1 209.157.22.101 : virtual server 설정하는 명령


ServerIron(config-vs-virtual1)#port http


ServerIron(config-vs-virtual1)#port default disable


ServerIron(config-vs-virtual1)#bind http server1 http server2 http : virtual server virtual1 http


ServerIron(config-vs-virtual1)#end                           port real server 1, 2 http port


 bind하는 명령(real server 1개씩 추가/삭제 가능)


ServerIron#write memory                                       


ServerIron#.Write startup-config in progress.                                       


.Write startup-config done.


ServerIron#

저작자 표시 비영리 변경 금지
신고

'업무이야기 > Brocade' 카테고리의 다른 글

Brocade FLS624G dhcp 구성 config (Foundry)  (0) 2012.01.25
Foundry Command Reference Guide  (0) 2012.01.12
ServerIron의 SLB(Server Load Balancing)  (0) 2012.01.04


L4#1 configuration

>> Main# /c/dump
script start "Alteon 180e" 4  /**** DO NOT EDIT THIS LINE!
/* Configuration dump taken 17:41:11 Tue Jan  3, 2012
/* Version 10.0.28,  Base MAC address 00:60:cf:42:d4:10
/c/port 1
        pvid 192
/c/port 2
        pvid 20
/c/port 3
        pvid 10
/c/port 5
        pvid 10
/c/port 8
        tag ena
        pvid 100
/c/vlan 1
        def 4 6 7 9
/c/vlan 10
        ena
        name "VLAN 10"
        def 3 5 8
/c/vlan 20
        ena
        name "VLAN 20"
        def 2 8
/c/vlan 100
        ena
        name "VLAN 100"
        def 8
/c/vlan 192
        ena
        name "VLAN 192"
        def 1 8
/c/stp 1/off
/c/stp 1/clear
/c/stp 1/add 1 10 20 100 192
/c/trunk 1
        ena
        add 8
/c/ip/if 1
        ena
        addr 192.168.1.52
        vlan 192
/c/ip/if 2
        ena
        addr 20.20.20.2
        mask 255.255.255.0
        broad 20.20.20.255
        vlan 20
/c/ip/if 3
        ena
        addr 10.10.10.2
        mask 255.255.255.0
        broad 10.10.10.255
        vlan 10
/c/ip/if 8
        ena
        addr 1.1.1.2
        mask 255.255.255.0
        broad 1.1.1.255
        vlan 100
/c/ip/gw 1
        ena
        addr 192.168.1.60
/c/vrrp/on
/c/vrrp/hotstan enabled
/c/vrrp/vr 10
        ena
        vrid 10
        if 3
        addr 10.10.10.1
        adver 2
        share dis
        track
                ports e
/c/vrrp/vr 20
        ena
        vrid 20
        if 2
        addr 20.20.20.1
        adver 2
        share dis
        track
                ports e
/c/vrrp/vr 100
        ena
        vrid 100
        if 8
        addr 1.1.1.1
        adver 2
        share dis
/c/vrrp/vr 192
        ena
        vrid 192
        if 1
        addr 192.168.1.51
        adver 2
        share dis
        track
                ports e
/c/vrrp/group
        ena
        vrid 1
        if 1
        prio 101
        share dis
        track
                vrs dis
                ifs dis
                ports ena
                l4pts dis
                reals dis
                hsrp dis
                hsrv dis
/c/slb
        on
/c/slb/adv
        direct ena
/c/slb/sync
        state e
/c/slb/real 1
        ena
        rip 10.10.10.12
/c/slb/real 2
        ena
        rip 10.10.10.13
/c/slb/group 1
        metric hash
        health http
        add 1
        add 2
/c/slb/group 2
        add 1
        add 2
/c/slb/port 1
        client ena
        hotstan ena
/c/slb/port 2
        client ena
        hotstan ena
/c/slb/port 3
        client ena
        server ena
        hotstan ena
/c/slb/port 5
        server ena
        hotstan ena
/c/slb/port 8
        client ena
        intersw ena
/c/slb/virt 1
        ena
        vip 10.10.10.10
/c/slb/virt 1/service http
        group 1
/c/slb/virt 2
        ena
        vip 10.10.10.11
/c/slb/virt 2/service ftp
        group 2
        ftpp ena
/c/slb/virt 2/service ftp-data
        group 2
/
script end  /**** DO NOT EDIT THIS LINE!



L4#2 configuration
>> Configuration# /c/dump
script start "Alteon AD3" 4  /**** DO NOT EDIT THIS LINE!
/* Configuration dump taken 17:46:01 Tue Jan  3, 2012
/* Version 10.0.28,  Base MAC address 00:60:cf:49:ea:d0
/c/sys
        tnet ena
/c/port 1
        pvid 192
/c/port 2
        pvid 20
/c/port 3
        pvid 10
/c/port 5
        pvid 10
/c/port 8
        tag ena
        pvid 100
/c/vlan 1
        def 4 6 7 9
/c/vlan 10
        ena
        name "VLAN 10"
        def 3 5 8
/c/vlan 20
        ena
        name "VLAN 20"
        def 2 8
/c/vlan 100
        ena
        name "VLAN 100"
        def 8
/c/vlan 192
        ena
        name "VLAN 192"
        def 1 8
/c/stp 1/off
/c/stp 1/clear
/c/stp 1/add 1 10 20 100 192
/c/trunk 1
        ena
        add 8
/c/ip/if 1
        ena
        addr 192.168.1.53
        vlan 192
/c/ip/if 2
        ena
        addr 20.20.20.3
        mask 255.255.255.0
        broad 20.20.20.255
        vlan 20
/c/ip/if 3
        ena
        addr 10.10.10.3
        mask 255.255.255.0
        broad 10.10.10.255
        vlan 10
/c/ip/if 8
        ena
        addr 1.1.1.3
        mask 255.255.255.0
        broad 1.1.1.255
        vlan 100
/c/ip/gw 1
        ena
        addr 192.168.1.60
/c/vrrp/on
/c/vrrp/hotstan enabled
/c/vrrp/vr 10
        ena
        vrid 10
        if 3
        prio 99
        addr 10.10.10.1
        adver 2
        share dis
        track
                ports e
/c/vrrp/vr 20
        ena
        vrid 20
        if 2
        prio 99
        addr 20.20.20.1
        adver 2
        share dis
        track
                ports e
/c/vrrp/vr 100
        ena
        vrid 100
        if 8
        prio 99
        addr 1.1.1.1
        adver 2
        share dis
/c/vrrp/vr 192
        ena
        vrid 192
        if 1
        prio 99
        addr 192.168.1.51
        adver 2
        share dis
        track
                ports e
/c/vrrp/group
        ena
        vrid 1
        if 1
        share dis
        track
                vrs dis
                ifs dis
                ports ena
                l4pts dis
                reals dis
                hsrp dis
                hsrv dis
/c/slb
        on
/c/slb/adv
        direct ena
/c/slb/sync
        state e
/c/slb/real 1
        ena
        rip 10.10.10.12
/c/slb/real 2
        ena
        rip 10.10.10.13
/c/slb/group 1
        metric hash
        health http
        add 1
        add 2
/c/slb/group 2
        metric hash
        health ftp
        add 1
        add 2
/c/slb/port 1
        client ena
        hotstan ena
/c/slb/port 2
        client ena
        hotstan ena
/c/slb/port 3
        server ena
        rts ena
        hotstan ena
/c/slb/port 4
        rts ena
/c/slb/port 5
        server ena
        hotstan ena
/c/slb/port 8
        client ena
        intersw ena
/c/slb/virt 1
        ena
        vip 10.10.10.10
/c/slb/virt 1/service http
        group 1
/c/slb/virt 2
        ena
        vip 10.10.10.11
/c/slb/virt 2/service ftp
        group 2
        ftpp ena
/c/slb/virt 2/service ftp-data
        group 2
/
script end  /**** DO NOT EDIT THIS LINE!

저작자 표시 비영리 변경 금지
신고

'업무이야기 > Radware' 카테고리의 다른 글

Alteon config 기본 설정  (0) 2012.02.07
Alteon SLB에서 PIP(Proxy IP) 설정  (1) 2012.02.04
Alteon L4 스위치 기본 설정방법  (0) 2011.12.26
L4 스위치 VRRP 로 SLB 구성 (Hotstandby)  (0) 2011.12.21
L4 스위치 VRRP  (0) 2011.12.21
[ALTEON] VRRP Hot-Standby 설정예제  (0) 2011.11.14