쫑콩아빠의 지금 이 순간...

Example 2 adds the default heartbeat profile to the unprotected inline bypass solution on GigaVUE-HC2 in Example 1.

Step

Description

Command

1. Configure inline network aliases, port type (inline-network), and administratively enable inline network ports.

(config) # port 3/1/x1 alias iN1
(config) # port iN1 type inline-network
(config) # port iN1 params admin enable

(config) # port 3/1/x2 alias iN2
(config) # port iN2 type inline-network
(config) # port iN2 params admin enable

2. Configure inline network.

(config) # inline-network alias inNet pair net-a iN1 and net-b iN2

3. Configure inline tool ports, port type (inline-tool), and administratively enable inline tool ports.

(config) # port 3/1/x3 alias iT1
(config) # port iT1 type inline-tool
(config) # port iT1 params admin enable

(config) # port 3/1/x4 alias iT2
(config) # port iT2 type inline-tool
(config) # port iT2 params admin enable

4. Configure default heartbeat profile.

(config) # hb-profile alias hb1
(config hb-profile alias hb1) # exit
(config) #

5. Configure inline tool and enable it.

(config) # inline-tool alias inTool pair tool-a iT1 and tool-b iT2
(config) # inline-tool alias inTool enable

6. Specify heartbeat profile and enable heartbeat.

(config) # inline-tool alias inTool hb-profile hb1
(config) # inline-tool alias inTool heart-beat

7. Configure map passall, from inline network to inline tool.

(config) # map-passall alias inMap
(config map-passall alias inMap) # from inNet
(config map-passall alias inMap) # to inTool
(config map-passall alias inMap) # exit
(config) #

8. Configure the path of the traffic to inline tool.

(config) # inline-network alias inNet traffic-path to-inline-tool

9. Display the configuration for this example.

(config) # show hb-profile
(config) # show inline-tool