쫑콩아빠의 지금 이 순간...

Example 3 adds a second inline tool to the unprotected inline bypass solution on GigaVUE-HC2 in Example 1 and creates an inline tool group consisting of two tools. It also configures a custom heartbeat profile.

Step

Description

Command

1. Configure inline network aliases, port type (inline-network), and administratively enable inline network ports.

(config) # port 3/1/x1 alias iN1
(config) # port iN1 type inline-network
(config) # port iN1 params admin enable

(config) # port 3/1/x2 alias iN2
(config) # port iN2 type inline-network
(config) # port iN2 params admin enable

2. Configure inline network.

(config) # inline-network alias inNet pair net-a iN1 and net-b iN2

3. Configure inline tool ports, port type (inline-tool), and administratively enable inline tool ports.

(config) # port 3/1/x3 alias iT1
(config) # port iT1 type inline-tool
(config) # port iT1 params admin enable

(config) # port 3/1/x4 alias iT2
(config) # port iT2 type inline-tool
(config) # port iT2 params admin enable

(config) # port 3/1/x5 alias iT3
(config) # port iT3 type inline-tool
(config) # port iT3 params admin enable

(config) # port 3/1/x6 alias iT4
(config) # port iT4 type inline-tool
(config) # port iT4 params admin enable

4. Configure a custom heartbeat profile.

(config) # hb-profile alias hb_custom
(config hb-profile alias hb_custom) # custom-packet http://1.1.1.1/tftpboot/hbpackets/MyHBPacket.pcap
(config hb-profile alias hb_custom) # packet-format custom
(config hb-profile alias hb_custom) # exit
(config) #

5. Configure inline tools and enable them.

(config) # inline-tool alias inTool1 pair tool-a iT1 and tool-b iT2
(config) # inline-tool alias inTool2 pair tool-a iT3 and tool-b iT4

(config) # inline-tool alias inTool1 enable
(config) # inline-tool alias inTool2 enable

6. Specify heartbeat profile and enable heartbeat on each inline tool.

(config) # inline-tool alias inTool1 hb-profile hb_custom
(config) # inline-tool alias inTool2 hb-profile hb_custom
(config) # inline-tool alias inTool1 heart-beat
(config) # inline-tool alias inTool2 heart-beat

7. Configure inline tool group and enable it.

(config) # inline-tool-group alias inToolGroup tool-list inTool1,inTool2
(config) # inline-tool-group alias inToolGroup enable

8. Configure map passall, from inline network to inline tool group.

(config) # map-passall alias inMap
(config map-passall alias inMap) # from inNet
(config map-passall alias inMap) # to inToolGroup
(config map-passall alias inMap) # exit
(config) #

9. Configure the path of the traffic to inline tool.

(config) # inline-network alias inNet traffic-path to-inline-tool

10. Display the configuration for this example.

(config) # show inline-tool-group
(config) # show hb-profile
(config) # show map