본문 바로가기
업무이야기/패킷전달플랫폼

How To: Packet capture on Gigamon interface

by 쫑콩아빠 2020. 6. 3.
반응형

“파트너스 활동을 통해 일정액의 수수료를 제공받을 수 있음"


How To: Packet capture on Gigamon interface
2020. 4. 25•How to
Feature
Flow Mapping
Title
How To: Packet capture on Gigamon interface
Objective
Perform packet capture on Gigamon interface for troubleshooting.
 
Environment
HC-Series
Procedure
Please note: This feature is currently available for software version 5.4 and above.

Step1. Identify one unused port on the chassis and enable the port. This unused port will be used to capture and copy the traffic. (port type can be any). Channel port is only required in case you want to capture in direction (Tx or both). It is not required in order to capture only Rx traffic.
Rx = IfInPackets on a port.
Tx = IfOutPackets on a port.
port 1/3/x9 params admin enable
port 1/3/x9 alias unused-channel-port

Step2.  Add a capture filter to start the packet capture. 
#Example1
pcap alias nw-side
port 1/4/g16 both (Interface on which you want to capture the packets)  
channel-port 1/3/x9 (Unused port to copy the traffic)
packet-limit 20000
filter ipsrc 10.10.10.10 /32
exit

#To create another filter, please create another pcap profile.
#Example2
pcap alias IT-side
port 1/3/x11 rx
channel-port 1/3/x10
packet-limit 20000
filter ipdst 30.30.30.30 /32
exit

#Example3
pcap alias SSL
port 1/3/x11 tx
channel-port 1/3/x10
packet-limit 20000
filter ipdst 30.30.30.30 /32
exit

#Verification
show pcap alias nw-side
show pcap
show file pcap

Step3.  Reproduce the problem. 
Initiate a session between the client and server, to ensure that specific packets can be captured.

Step4. Stop the packet capture.
no pcap alias issl1
or
clear pcap all
or 
no pcap all

Step5. Verify if the packet capture file has been created.
show file pcap

Step6. Upload to your local machine or scp/tftp server. 
file pcap upload <filename> scp://user:pass@10.10.10.10/dir/folder/<filename>
file pcap delete-all
file pcap delete <filename>

Step7. Analyze the pcap file

 
Additional Notes
Filtering can be defined based on 6 conditions
IP source
IP destination
Port source
Port destination
Protocol
Tcp control
Tag
packet capture broadcom pcap bcm data port tcpdump


“파트너스 활동을 통해 일정액의 수수료를 제공받을 수 있음"


반응형

'업무이야기 > 패킷전달플랫폼' 카테고리의 다른 글

FM5801 CLI  (0) 2020.06.03
RestAPI Exemple  (0) 2020.06.03
AFP, ASF Sample  (0) 2020.01.02
GigaSMART De-duplication  (0) 2019.09.23
Insert VLAN Tag  (0) 2019.09.23