ver 07.2.02eT7e1
!
module 1 fls-24-port-copper-base-module
!
global-stp
!
!
!
vlan 1 name DEFAULT-VLAN by port
 spanning-tree
!
vlan 10 name VLAN-10 by port
 tagged ethe 0/1/21
 untagged ethe 0/1/1 to 0/1/2
 router-interface ve 10
 spanning-tree
!
vlan 20 name VLAN-20 by port
 tagged ethe 0/1/21
 untagged ethe 0/1/3 to 0/1/4
 router-interface ve 20
 spanning-tree                                                   
!
vlan 30 name VLAN-30 by port
 tagged ethe 0/1/21
 untagged ethe 0/1/5 to 0/1/6
 router-interface ve 30
 spanning-tree
!
vlan 40 name VLAN-40 by port
 tagged ethe 0/1/21
 untagged ethe 0/1/7 to 0/1/8
 router-interface ve 40
 spanning-tree
!
vlan 100 name VLAN-100 by port
 untagged ethe 0/1/23 to 0/1/24
 router-interface ve 100
 spanning-tree
!
!
!
!
!
!                                                                
loop-detection-interval 1
ip dhcp-server enable
!
ip dhcp-server pool vlan10
 dhcp-default-router 10.10.10.1
 dns-server 168.126.63.1 164.124.101.2 
 domain-name a.com
 excluded-address 10.10.10.1
 excluded-address 10.10.10.101 10.10.10.254
 lease 1 0 0
 network 10.10.10.0 255.255.255.0

deploy
!
!
ip dhcp-server pool vlan20
 dhcp-default-router 10.10.20.1
 dns-server 168.126.63.1 164.124.101.2

 excluded-address 10.10.20.1
 excluded-address 10.10.20.101 10.10.20.254
 lease 1 0 0
 network 10.10.20.0 255.255.255.0
 deploy
!
!
ip dhcp-server pool vlan30                                       
 dhcp-default-router 10.10.30.1
 dns-server 168.126.63.1 164.124.101.2

 excluded-address 10.10.30.1
 excluded-address 10.10.30.101 10.10.30.254
 lease 1 0 0
 network 10.10.30.0 255.255.255.0
 deploy
!
!
ip dhcp-server pool vlan40
 dhcp-default-router 10.10.40.1
 dns-server 168.126.63.1 164.124.101.2

 excluded-address 10.10.40.1
 excluded-address 10.10.40.101 10.10.40.254
 lease 1 0 0
 network 10.10.40.0 255.255.255.0
 deploy
!
ip route 0.0.0.0 0.0.0.0 10.10.1.1
!
no port bootp
interface ethernet 0/1/1
 loop-detection
!
interface ethernet 0/1/2                                         
 loop-detection
!
interface ethernet 0/1/3
 loop-detection
!
interface ethernet 0/1/4
 loop-detection
!
interface ethernet 0/1/5
 loop-detection
!
interface ethernet 0/1/6
 loop-detection
!
interface ethernet 0/1/7
 loop-detection
!
interface ethernet 0/1/8
 loop-detection
!
interface ethernet 0/1/9
 loop-detection
!                                                                
interface ethernet 0/1/10
 loop-detection
!
interface ethernet 0/1/11
 loop-detection
!
interface ethernet 0/1/12
 loop-detection
!
interface ethernet 0/1/13
 loop-detection
!
interface ethernet 0/1/14
 loop-detection
!
interface ethernet 0/1/15
 loop-detection
!
interface ethernet 0/1/16
 loop-detection
!
interface ethernet 0/1/17
 loop-detection                                                  
!
interface ethernet 0/1/18
 loop-detection
!
interface ethernet 0/1/19
 loop-detection
!
interface ethernet 0/1/20
 loop-detection
!
interface ethernet 0/1/21
 loop-detection
!
interface ethernet 0/1/22
 loop-detection
!
interface ve 10
 ip address 10.10.10.1 255.255.255.0
!
interface ve 20
 ip address 10.10.20.1 255.255.255.0
!
interface ve 30                                                  
 ip address 10.10.30.1 255.255.255.0
!
interface ve 40
 ip address 10.10.40.1 255.255.255.0
!
interface ve 100
 ip address 10.10.1.2 255.255.255.252

 

 

config 내용은 별 다를게 없으나.. brocade장비는 deploy를 해줘야 dhcp를 뿌려준다고 합니다.

저작자 표시 비영리 변경 금지
신고

'업무이야기 > Brocade' 카테고리의 다른 글

Brocade FLS624G dhcp 구성 config (Foundry)  (0) 2012.01.25
Foundry Command Reference Guide  (0) 2012.01.12
ServerIron의 SLB(Server Load Balancing)  (0) 2012.01.04

Foundry Command Reference Guide입니다.


FoundryCommandReference.pdf

저작자 표시 비영리 변경 금지
신고

'업무이야기 > Brocade' 카테고리의 다른 글

Brocade FLS624G dhcp 구성 config (Foundry)  (0) 2012.01.25
Foundry Command Reference Guide  (0) 2012.01.12
ServerIron의 SLB(Server Load Balancing)  (0) 2012.01.04

 

ServerIron SLB(Server Load Balancing)


 


ServerIron>enable


Password:****


ServerIron#config term


ServerIron(config)#ip add 209.157.22.10/24 : switch IP Address 설정하는 명령


ServerIron(config)#ip default-gateway 209.157.22.10 : switch default-gateway 설정하는 명령


ServerIron(config)#server router-port 1 : router 연결되어 있는 port 지정하는 명령


ServerIron(config)#server real server1 209.157.22.1  : real server 설정하는 명령


ServerIron(config-rs-server1)#port http                        : load balancing port 지정하는 명령


ServerIron(config-rs-server1)#port default disable        


ServerIron(config-rs-server1)#port http keepalive  : http port  health check enable시키는 명령


ServerIron(config-rs-server1)#port http url GET /index.htm : http health check url 설정하는 명령


ServerIron(config-rs-server1)#server real server2 209.157.22.2


ServerIron(config-rs-server2)#port http


ServerIron(config-rs-server2)#port default disable


ServerIron(config-rs-server2)# port http url GET /index.htm


ServerIron(config-vs-server2)#server virtual virtual1 209.157.22.101 : virtual server 설정하는 명령


ServerIron(config-vs-virtual1)#port http


ServerIron(config-vs-virtual1)#port default disable


ServerIron(config-vs-virtual1)#bind http server1 http server2 http : virtual server virtual1 http


ServerIron(config-vs-virtual1)#end                           port real server 1, 2 http port


 bind하는 명령(real server 1개씩 추가/삭제 가능)


ServerIron#write memory                                       


ServerIron#.Write startup-config in progress.                                       


.Write startup-config done.


ServerIron#

저작자 표시 비영리 변경 금지
신고

'업무이야기 > Brocade' 카테고리의 다른 글

Brocade FLS624G dhcp 구성 config (Foundry)  (0) 2012.01.25
Foundry Command Reference Guide  (0) 2012.01.12
ServerIron의 SLB(Server Load Balancing)  (0) 2012.01.04


티스토리 툴바